REFILL FILAMENT ABS
Print Temperature210 - 250 ℃
Distortion Temp.73 (℃, 0.45MPa)
Melt Flow Index15(220℃/10kg) (g/10min)
Tensile Strength40 (MPa)
Elongation at Break30 (%)
Bending Strength68 (MPa)
Bending Modulus2443 (MPa)
IZOD Impact Strength42 (kJ/㎡)
With our Eco-Friendly Refillable Cartridge, you no longer have to purchase a new cartridge every time the filament runs out.
Instead, you can purchase our Refill Filaments at a much lower price.
To refill, simply replace the spool and the chip inside the cartridge (The spool can be replaced with any color or material of your choice).
With continued use of the Refill Filaments, the cartridge's rubber roller may wear out. In such a case, please purchase a new Refillable Cartridge.
◆ Note: Only filaments that are certified by Sindoh can be used.
◆ How to replace the filament spool
Please check whether your cartridge is Type A or B and then proceed to replacing the spool while referring to the manual according to the type of the cartridge..
A type cartridge
B type cartridge