skip menu
Go to contents
Go to main menu
Go to footer








ABS is a terpolymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene.​ ABS combines the strength and for its hardness, gloss, toughness, and electrical insulation properties. Its shape and structure can be altered or damaged by sunlight.​ It is flammable when exposed to high temperatures.​ The most important mechanical properties of ABS are impact resistance and toughness. 


A variety of modifications can be made to improve impact resistance, toughness, and heat resistance. The impact resistance can be amplified by increasing the proportions of polybutadiene in relation to styrene and also acrylonitrile, although this causes changes in other properties. Impact resistance does not fall off rapidly at lower temperatures. Stability under load is excellent with limited loads. 


Thus, by changing the proportions of its components, ABS can be prepared in different grades. Two major categories could be ABS for extrusion and ABS for injection molding, then high and medium impact resistance. Generally ABS would have useful characteristics within a temperature range from −20 to 80 °C (−4 to 176 °F).


ABS's light weight and ability to be melted and extruded make it useful in manufacturing goods. Household and consumer goods comprise the major applications of ABS. it can be used to make things like drain-waste-vent (DWV) pipe systems, musical instruments (recorders, plastic clarinets, piano movements), golf club heads (because of its good shock absorbance), automotive trim components, automotive bumper bars, medical devices for blood access, enclosures for electrical and electronic assemblies, keyboard keycaps, protective headgear, whitewater canoes, buffer edging for furniture and joinery panels, luggage and protective carrying cases, small kitchen appliances, and toys. 


  ​ ​
Print Temperature(℃)210 ~ 250 ℃
Color7 (Black, White, Grey, Red, Green, Blue, Yellow)

   * 1.3kg ABS available for 7X (Black & White)



Here are some sample print outputs using ABS.

1) X-Wing from Movie 'Starwars' made by Stefan, Random Design Studio













2) Batman Helmet from the movie, Batman vs Superman


If the filament in the cartridge runs out, you can get this Refill Filament spool to refill. 

You can simply refill the filament by replacing the filament spool inside the cartridge and the smart chip inserted on the cartridge.

If you use a cartridge too long, the filament feeding rubber roller of the cartridge can be worn out and may cause a filament feeding problem. If so, you may purchase a new cartridge.​ 


◆ Note: Only Sindoh genuine filaments that are tested and certified by Sindoh's Lab ​are recommended for the best quality of print output. 



◆ How to replace the filament spool: Please check whether your cartridge is A type or B type. Then, follow the instructions on the below manual according to your cartridge type to ​proceed spool replacement. 

 ​A Type Cartridge Manual

 ​B Type Cartridge Manual   ​ 




​◆ To see the MSDS of the ABS Filament, Please click below. ​ ​

Sindoh 3D Printer is available at -