- Print Monitoring
-
The DP200 can check the operation status on PC
and mobile in real time, and remote control is possible
in case of trouble. With Ethernet, you can manage
multiple printers with a single PC.
- AUTO LOADING FILAMENT
-
The world's first 'automatic supply' function is
installed in a personal 3D printer to enhance user's convenience.
It is possible to completely prevent nozzle clogging
due to user's mistake.
- Assisted
Bed Leveling - This function automatically checks the horizontal position of
the printer bed. By turning the screw as the result of
guiding from the touch screen, the best output is possible
in the correct horizontal position.
-
WIDE SELECTION OF
CONNECTIVITY OPTIONS -
Print everything you love from a secure and accessible
location. DP200 provides a wide range of connectivity options
including Ethernet, USB Flash drive, USB cable, and Wi-Fi.
- 5” Touch Panel
with intuitive GUI -
With a 5-inch color touch screen panel, you can
swipe and tap the scroll way through to control just
like your smart phone. An intuitive user interface that
is programmed will ensure that you will not get lost.
-
USER SAFETY
AND CONVENIENCE -
-
The DP200 was completed with Tangerine, a global
design group. It has been designed with an ultra-small design
and dramatically increased the size of the molding compared
to other models. And through the transparent window and
the internal LED lamp, you can see the completion of the work.
3dwox dp200
specifications
- Print TechnologyFFF
- Print headSingle Nozzle
- Nozzle Diameter0.4mm
- Max Build size (WxDxH)200 x 200 x 185mm (7.9”x7.9”x7.3”)
- MaterialPLA, ABS
- ConnectivityUSB Flash Drive, Ethernet, WiFi, USB Cable
- Layer Thickness0.05 ~ 0.4 mm
- Filament Diameter1.75mm
- Size (W×D×H)421 × 433 × 439mm (16.5”x17”x17”)
- User Interface5” color touch screen
- LevelingAuto Leveling Measurement + Manual Adjustment
- Auto-loading CartridgeAutomatically loads filament to nozzle
- LED LampFor Internal Lighting
- Monitoring CameraCheck print status remotely with laptop or smartphone via WiFi connection
- Slicer3DWOX Desktop Slicer
Sindoh Cloud Slicer
CURA 15.04.6 or under
Simplify3D Ver.4.1 - Software CompatibilitySolidworks Add-in 2016 or above
AutoDesk TinkerCAD - Operating SystemWindow 7 or above / Mac OSX 10.10 above
- NoteStandard VGA driver on operating system, or a graphics card doesn't support OpenGL 2.0,
may cause unknown error in 3DWOX Desktop.
