• (Release Note)

• 1. This Zip file contains program versions for 32bit & 64bit.
• 2. Added/Modified Profile setting. 
• - Added Line Width setting.
• - Added Flow Rate setting.
• - Added Speed setting.
• - Separated Roof & Floor of Support Interface and added sub settings for each option.
• 3. Fixed other bugs and stablized program.

• (Release Note)

• 1. Changed support file type (Load/Save).
• - Added 3mf format, Deleted amf format. 
• 2. Added Model selection method. 
• - Selection and deselection is available via Drag. 
• 3. Changed model selection display. 
• Outline ->  Handle on the top
• 4. Rotation can be controllable via Rotation handle. 
• 5. Changed background bed design.

• (Release Note)

• 1. Added program version for 32bit, 64bit.
• 2. Added RIZE 2XC, RIZE 7XC model.
• 3. Added Danish language interface.
• 4. Changed Setting UI on the advanced mode.
• 5. Added 'nozzle temperature per layer' setting function.
• 6. Added image insertion function to G-code.
• 7. Added initial layer flow compensation function.
•  
• For users whose PC fails to install the 3DWOX Desktop Slicer, here are the portable (standalone) versions; no installation required.  
  • 3DWOX Desktop v1.5.2751.1 x64 (For 64bit).zip
  • 3DWOX Desktop v1.5.2751.1 x86 (For 32bit).zip
  •  
  • In order to run this portable version, your system must have installed this Visual C++ Redistributable. Please download and install it if you haven't installed it yet. 
    • Click here to install x64 version (for 64bit)
    • Click here to install x86 version (for 32bit)

• (Release Note)

• - Added new models; 1X, 5X, 7X.
• - Added additional wipe tower parameter.
• - Added new temperature controls (raft temperature & bottom layer temperature control)
• - Supported Wisdom 3D (machine setting)

• (Release Note)

• Added converting scale unit function, "Convert inch to mm" in Scale pop-up menu.
• Added Skin Overlap (setting): Made the ratio for skin overlap and infill overlap separately adjustable.
• Modified nozzle movement logic: Move z first and then move x and y when moving to a next layer.
• Added Internal Moving Area (setting): Enabled to adjust the areas that can move into the model without retraction.
• Added Wall Printing Direction: Made user control capable of choosing wall printing orders (printing from inside to outside or vice versa).
• Added "Show only current layer" function in Layer Viewer. (Only g-code can be displayed in current layer.)

• (Release Note)

• Added PVA+ material : 2X series models.
• Added 'Transparent' feature on 'Layer Viewer' mode.
• Added 'Export Profile' feature on Easy Mode.
• Enabled 2 nozzle printing with PLA and Flexible materials. (2X series)
• Fix a bug that malfunction occurs when printing 3 or more files in Swapping Printing mode.
• Fixed other bugs.

• 1. Fixed a bug that brim doesn't get stuck to the output model.
• 2. Fixed a bug that Slicer partially not working when the material type is set to ETC. in 2X.
• 3. Fixed other bugs.

• 1. Added 3DWOX 1, LION 2X Printers.
• 2. Added Custom Profile function.
• 3. Added Profile Selection function in "SETTINGS".
• 4. Changed the shape of the Wipe Tower.
•  - Added related profiles: Tower Outer Cartridge , Tower Base Size, Tower Inner Cartridge, Tower Inner Size.
  
• 5. Added Preheat Nozzle Temperature function while printing with Two Nozzle.(Available when Standby Temperature Enabled in Two Nozzle).
• - Added related profiles: Enable Preheat, Preheat Threshold Time.
• 6. Open Material Mode support for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303.
• 7. Added ETC Material in the Custom Profile for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303 (Open Material Support).
• 8. Revised Sindoh Flexible, Sindoh PVA Filament Default Profile.
• 9. Added Regular Fan Speed, Maximum Fan Speed Profile : In normal mode, when Fan Speed(Regular Fan Speed) and print time per layer decreases, Fan Speed(Maximum Fan Speed) is separated.
• 10. File name is displayed when the model is loaded.
• 11. Fixed Other bugs.

• 1. Added the support horizontal expansion.
• 2. Fixed the issue wherein the skirt line is sometimes not created around the support.
• 3. Fixed the issue wherein the support is in the output before the brim/skirt.
• 4. Added the F1 ECO model (only for Korea).

• 1. Modification in the "Settings" User Interface.
• 2. Additional Language Support. (German)
• 3. DP200/DP201/2X
  • Support and Raft: Support Interface function added.
    (Automatically enable the support density between the model and the raft to 100%)
  • Layer Color function added: Automatic Cartridge Switch available in the selected layers. Link (Layer Color)
• 4. 2X
  • Nozzle Switch / Wipe Tower added to support the Dual Nozzle Extrusion.
  • Cartridge Selection added in the "Settings" for 3DWOX 2X support.

• 1. Support edit viewer Bugs fixed.

• 1. Skin outline settings added in Advanced(1) -> Infill section.
• 2. DP201 model : Gcode from 3rd party slicer cannot be printed.
• 3. Secure print option added.

• Additional Languages supported.(French, Spanish, Japanese)
• 2. Operates as an update instead of deletion when installing the new version.
• 3. DP202 additional problems fixed.(Korea Only)
• 4. Minor bugs fixed.

• 1. Additional Languages supported.(French, Spanish, Japanese)
• 2. Operates as an update instead of deletion when installing the new version.
• 3. DP202 additional problems fixed.(Korea Only)
• 4. Minor bugs fixed.

• 1. Minor bugs fixed.

• 1. New support type (Zigzag type) has been added and set as default for support type.
• 2. New types of Infill have been added to options. (crystal (1), (2))
• 3. Now able to save a file in STL and AMF formats.
• 4. Multi selection feature has been added (scale, rotation, translation).
  • Ctrl + Left Click(Mouse)
• 5. Additional guidance message for models desgined in inch scale has been added.
• 6. UI for the Profile settings screen has been changed.
• 7. DP202 model has been added to the printer list. (Korea only)
• 8. Minor bugs fixed.

• 1. The max build sizes set for Model DP201 and DP102 have been properly modified.

• 1. Calculation speed and inspection criterias of the [Optimize Print Directon] feature have been improved.
• 2. Now supports files in AMF format.
• 3. Now supports name and path of the file in multilingual and special characters.
• 4. Information regarding profile value and printer model has been added to the G-code file.
• 5. DP102, DP201 model has been added to the list.
• 6. Minor bugs have been fixed.

• 1. Program UI Change: The screen layout and the design of an icon have been changed.
• 2. The slicing speed has been improved.
• 3. "Silent Mode" has been added.
• 4. Raft temperature control function error has been fixed.
• 5. Addition of the "Lay Flat" function and stabilization
• 6. Now capable of opening more than one STL file at once
• 7. Fixed the slicing error which have occured when opening some obj files

• 1. Loading a 3D model to the software now displays status in progress bar.
• 2. A new method of g-code file drag & drop has been added for file loading.
• 3. The central axis of the 3D view rotation method has been changed to Z-axis.
• 4. Setting a printing limit on the upper frontal part of an output [x:210, y:6, z:10 (mm)] and displaying it on the screen has been enabled.
• 5. The program can now run a large model file.(for 64bit windows os, depending on memory)
• 6. Printing the most outer line of the raft has been enabled.
• 7. The setting dialog UI has been rearranged for better visibility.
• 8. Quad mesh data files can be managed.
• 9. The spiralization option has been deleted.
• 10. Various bug fixes and improvements have been made.

• 1. Printing duration and length of filament usage shown during loading of a G-code
• 2. Filament usage amount is now shown in units of (g)
• 3. Default value for SKIRT has changed from 0 -> 1
• 4. Default value for TOP/BOTTOM THICKNESS has changed from 0.6 -> 0.8
• 5. Start code has changed from G92-20 to G92 -G15
• 6. +90/-90 buttons have been added to the rotation dialog
• 7. XYZ axis indicators added
• 8. Extra bug fixes

• Support SolidWorks version 2016 ~ 2019.
• Support additional printer models. (including 2-nozzle printers)
    - Supported Models: 3DWOX DP200, DP201, 1, 1X, 2X, 7X
• Integrate UI with 3DWOX Desktop Slicer. 

• This update is for Window OS above Window 7 SP1 and Solidworks 2016, 2017 & 2018
• Added 3DWOX 1, 2X and etc. models for the 3D printer option in Solidworks add-in.
• This version works only at the single nozzle printing mode in 2X.
• Added an open-material option for material setting. 

• This update is for SolidWorks 2016, 2017, 2018
• Bug fix for g-code transfer fail during security print mode

• Added new printer models. (DP102 / DP201 / DP202)
• Added analysis (Optimize Print Direction) function.
• Added analysis (thickness / overhang) function.
• If it is Assy, it can be output as one part or divided into each part.
• Changed to scale only with fixed ratio.

• 1. "Web Monitoring" has been improved.
  • Continuously monitors when "AutoShow" is selected
  • A few bugs have been fixed
• 2. "Help Button" has been enabled (Automatically connects to the Manual).
• 3. Profile
  • "Reset Button" has been added
  • Has been renewed to the latest profile
• 4. The option to set a printing limit on the upper frontal part of an output and display it on the screen has been enabled.
• 5. The issue has been fixed (Problem occurred due to the different usage of . and , when displaying figures).
• 6. Displays the borders of the selected model

• (Release Note)

• 1. Added/Modified Profile setting. 
• - Added Line Width setting.
• - Added Flow Rate setting.
• - Added Speed setting.
• - Separated Roof & Floor of Support Interface and added sub settings for each option.
• 2. Fixed other bugs and stablized program.

• (Release Note)

• 1. Changed support file type (Load/Save).
• - Added 3mf format, Deleted amf format. 
• 2. Added Model selection method. 
• - Selection and deselection is available via Drag. 
• 3. Changed model selection display. 
• Outline ->  Handle on the top
• 4. Rotation can be controllable via Rotation handle. 
• 5. Changed background bed design.

• (Release Note)

• 1. Added RIZE 2XC, RIZE 7XC model.
• 2. Added Danish language interface.
• 3. Changed Setting UI on the advanced mode.
• 4. Added 'nozzle temperature per layer' setting function.
• 5. Added image insertion function to G-code.
• 6. Added initial layer flow compensation function.

• (Release Note)

• - Added new models; 1X, 5X, 7X.
• - Added additional wipe tower parameter.
• - Added new temperature controls (raft temperature & bottom layer temperature control)

• (Release Note)

• Added converting scale unit function, "Convert inch to mm" in Scale pop-up menu.
• Added Skin Overlap (setting): Made the ratio for skin overlap and infill overlap separately adjustable.
• Modified nozzle movement logic: Move z first and then move x and y when moving to a next layer.
• Added Internal Moving Area (setting): Enabled to adjust the areas that can move into the model without retraction.
• Added Wall Printing Direction: Made user control capable of choosing wall printing orders (printing from inside to outside or vice versa).
• Added "Show only current layer" function in Layer Viewer. (Only g-code can be displayed in current layer.)

• (Release Note)

• Fixed a bug that slows down the 3D rotation view in the 'Layer Viewer' mode.
• Fixed other bugs.

(Release Note)

• Added PVA+ material : 2X series models.
• Added 'Transparent' feature on 'Layer Viewer' mode.
• Added 'Export Profile' feature on Easy Mode.
• Enabled 2 nozzle printing with PLA and Flexible materials. (2X series)
• Fix a bug that malfunction occurs when printing 3 or more files in Swapping Printing mode.
• Fixed other bugs.

• 1. Fixed a bug that brim doesn't get stuck to the output model.
• 2. Fixed a bug that Slicer partially not working when the material type is set to ETC. in 2X.
• 3. Fixed other bugs.

• 1. Added 3DWOX 1, LION 2X Printers.
• 2. Added Custom Profile function.
• 3. Added Profile Selection function in "SETTINGS".
• 4. Changed the shape of the Wipe Tower.
•  - Added related profiles: Tower Outer Cartridge , Tower Base Size, Tower Inner Cartridge, Tower Inner Size.
  
• 5. Added Preheat Nozzle Temperature function while printing with Two Nozzle.(Available when Standby Temperature Enabled in Two Nozzle).
• - Added related profiles: Enable Preheat, Preheat Threshold Time.
• 6. Open Material Mode support for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303.
• 7. Added ETC Material in the Custom Profile for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303 (Open Material Support).
• 8. Revised Sindoh Flexible, Sindoh PVA Filament Default Profile.
• 9. Added Regular Fan Speed, Maximum Fan Speed Profile : In normal mode, when Fan Speed(Regular Fan Speed) and print time per layer decreases, Fan Speed(Maximum Fan Speed) is separated.
• 10. File name is displayed when the model is loaded.
• 11. Fixed Other bugs.

• 1. Added the support horizontal expansion.
• 2. Fixed the issue wherein the skirt line is sometimes not created around the support.
• 3. Fixed the issue wherein the support is in the output before the brim/skirt.
• 4. Added the F1 ECO model (only for Korea).

• 1. Modification in the "Settings" User Interface.
• 2. Additional Language Support. (German)
• 3. DP200/DP201/2X
  • Support and Raft: Support Interface function added.
    (Automatically enable the support density between the model and the raft to 100%)
  • Layer Color function added: Automatic Cartridge Switch available in the selected layers. Link (Layer Color)
• 4. 2X
  • Nozzle Switch / Wipe Tower added to support the Dual Nozzle Extrusion.
  • Cartridge Selection added in the "Settings" for 3DWOX 2X support.

• 1. New support type (Zigzag type) has been added and set as default for support type.
• 2. New types of Infill have been added to options. (crystal (1), (2))
• 3. Now able to save a file in STL and AMF formats.
• 4. Multi selection feature has been added (scale, rotation, translation).
  • Command + Left Click(Mouse)
• 5. Additional guidance message for models desgined in inch scale has been added.
• 6. UI for the Profile settings screen has been changed.
• 7. DP202 model has been added to the printer list. (Korea only)
• 8. Skin outline settings added in Advanced(1) -> Infill section
• 9. DP201 model : Gcode from 3rd party slicer cannot be printed
• 10. Secure print option added.
• 11. Minor bugs fixed.

• 1. Additional Languages supported.(French, Spanish, Japanese)
• 2. Minor bugs fixed.

• 1. Calculation speed and inspection criterias of the [Optimize Print Directon] feature have been improved.
• 2. Now supports files in AMF format.
• 3. Now supports name and path of the file in multilingual and special characters.
• 4. Information regarding profile value and printer model has been added to the G-code file.
• 5. DP102, DP201, DP202 model has been added to the list.
• 6. Minor bugs have been fixed.

• 1. Program UI Change: The screen layout and the design of an icon have been changed.
• 2. Various bug fixes and improvements have been made.

Last modified : 2021-1-5​

1, Bug fix.

Bug: 3D model slicing image position is changed, so deviated uncommonly.    (within 1mm)

Last modified : 2020-11-30​

1. Add "Custom Profile".

2. In User Settings, add " Show the contact area between model and platform in a separate color". 

3, Update "Material" information.  

4, Small bug fix.

(Release Note)

• 1. Responded to specification changes as below
•     - Applied the changes in the material type and name that machine supports.
•     - Applied the changes in extended light intensity range into the interface.
•     - Included support printing conditions in the header.
•     - Changed the resin tank installation detecting interface according to its detection feature.
 
• 2. Enhancement
•     - Enhanced slicing speed.
•     - Added a deleting function for the remaining folder/data after forcible shutdown as restarting the machine.

• 3. Fixed other bugs.

• (Release Note)

• 1. Fixed an issue that didn't work when 'A1 + Small' was selected in Settings.
• 2. Fixed minor GUI component bugs.
• 3. Fixed other minor bugs.

• (Release Note)

• 1. Added a new support type; slanted type.
• 2. Added a new 'Measure' function menu.
• 3. Enhanced UI.
     ​- Added Always-on display feature showing detailed information on printer, material, and uploaded design model.

• (Release Note)

• New functions added
  • Viewing the model transparently or opaquely / Viewing Edges added
  • Multiple selection of models with mouse drag added
  • (Rotation) 'Place Surface to Platform' added
  • (Hollow) 'Generate Hole Plug' added
  • (Preview) 'See 2D Preview' added
  • (Clip Plane) added
  • Enable to load 3mf files
  • 'A1+ Small' at Printer Models added
  • (User Settings) 'Show Platform in Actual Image' added
  • (User Settings) 'Allow the models to move out of platform' added
  • (Print Settings) at Open Material > Others , Options about Speeds/Repeat of 1st layer/ tilt added
• Materials added
• Other bugs are fixed

(Release Note)

• Initial Release Slicer for Sindoh SLA Type 3D Printer
• Only works for SLA Type 3D Printer (Not Compatible with 3DWOX DP200/DP201/1/1X/2X/5X/7X)

(Release Note)

• Supported Languages: English, Spanish, German

(Release Note)

• Supported Languages :English, Spanish, German

(Release Note)

• Supported Languages: English, Spanish, German

(Release Note)

• Supported Languages: English, Chinese, Japanese, Korean

(Release Note)

• Supported Languages: English, Spanish, French, German

(Release Note)

• Supported Languages: English, Spanish, French, German

(Release Note)

• Supported Languages: English, Spanish, French, German

(Release Note)

• Supported Languages: English, Spanish, French, German

• This is the first version of Quick Installation Guide for A1+, SLA 3D printer series.
• Supported Languages: English, Chinese, Japanese, Korean

• 1. PVA+ Filament Support
• 2. Portuguese Support
• 3. Added 'File System Integrity Check' function when booting.

• USB recognition issue resolved

• 1. 3D Sindoh Cloud Feature Added

• 1. Open Material Function Added : Users can now use 3rd party filament without the cartridge
• 2. Can now interact with Amazon ALEXA

• 1. Adding a file for the Calibration Patten output when printing PLA + PVA combination.
• 2. Additional Languages supported (UI) : Spanish / German

• 1. Reduced the Y axis max. travel distance in bed lowering or jog mode (For the purpose of preventing bed interference)
• 2. Fixed other minor bugs.

• 1. Support 3DFF-222
• 2. Support spiral printing feature
• 3. Enable French
• 4. Change Nozzle position when filament is loaded (center position)
     - Reduced possibility rate of filament loading failure 

• Improved bed leveling accuracy
• Cloud Print feature added (TinkerCAD)

• 1. 3D Sindoh Cloud Feature Added

• Fixed a problem taking a long time to display an image when repeatedly displaying the thumbnail image by selecting a file over and over.

• Enabled Cloud Printing.
  - AutoCad TinkerCad, SolidWorks Apps for Kids

• 1. DP200/201 : Cartridge compatibility expansion

• 1. DP200/201 : German, Turkish language support added
• 2. DP200/201 : improvement for reducing 407 error from g-code created by Cura 

• 1. DP200/201 : Fix the issue which Wifi auto connection fails during the booting process in a certain condition.

• 1. DP201 : Fix a bug that makes the nozzel temperature intermittently unable to reach the certain point.
• 2. DP200, DP201 : Fix a bug which causes z-offset malfunction intermittently.

• 1. Solidworks Apps For Kids is Now Available! (only for DP201)
  • * Please refer to the following URL:http://3dprinter.sindoh.com/FAQs?id=1_51#panel-1
• 2. Security Print Added
  • - When the Security Print is Enabled
  • a. Password is required for printing with the 3DWOX Desktop (3DWOX Desktop(Windows) Ver 1.2.3 and above, 3DWOX Desktop(Mac OS) Ver 1.1.6 and above is required)
  • b. Password is required for printing directly through the USB Thumbdrive
  • c. Password is required for Web Monitoring
• 3. EC356 (sensing bug fix for intermittent Bed Heater disconnection) error fixed
• 4. Calculation bug fix for intermittent Extruder movement amount error
• 5. DP201, DP202 model : Built-in test print file changed

• 1. Correction in typing errors and Complementation of Japanese/Spanish/French Quick Guide

• 1. Reduced the Booting Time by deleting unnecessary initialization of the Nozzle Positioning when Booting.
• 2. Displays 'Loading' icon in the Web Monitor when printing through """Network Printer' on the 3DWOX Desktop Software.
• 3. Displays """Unsupported Filament!""" Pop-up when printing with an unsupported type of filament.
• 4. Display file names with special characters (" [Double Quotation marks] and ' [Quotation marks]) in the Web Monitor.
• 5. Countermeasures applied to sending the identical images intermittently when printing *.gcode files with the E-mail settings.
• 6. Displays "Time Remaining" in the Web Monitor.
• 7. Reduced the Operating Time by removing unnecessary Bed movements during the processes such as Cartridge load / Manual Cleaning.
• 8. Additional Supported Languages (Spanish / French)
• 9. Users are now able to switch the cartridge and continue printing when the Filament runs out during printing(Notification 432).

• 1. The issue that the e-mail notification function does not work depending on the server settings has been addressed.
• 2. The error codes that have occured in some devices when checking the leveling sensor have been fixed.

• 1. Printer stores a printing job in its embedded memory and prints it after a current printing job is finished.
• 2. Cancellation during Bed lowering / Extruder jog Mode has been enabled.
• 3. Noise made during short distance movement has been improved.
• 4. Quality of embedded Test Gcode File has been improved.
• 5. Operation regarding Cartridge end/Heater malfuction detectoin have been improved.
• 6.Bugs have been fixed.

• 1. Adjusted Laser Control setting values to improve surface quality.
• 2. Updated minor changes in 'Small Platform & Resin Tank Kit' detection function.
• 3. Adjusted the laser power for some resins on the 'First Raft Laser Power' setting.

• This is the first version of A1+ Firmware.