Downloads

Software
- [Slicer] A Series Desktop (Windows 10 64bit)(version: 0.9.1208.2) : A+Desktop_v0.9.1208.2.exe Release
  Release Note
  Last modified : 2020-07-13
  - 1. Responded to specification changes as below
  - - Applied the changes in the material type and name that machine supports.
  - - Applied the changes in extended light intensity range into the interface.
  - - Included support printing conditions in the header.
  - - Changed the resin tank installation detecting interface according to its detection feature.
  - 2. Enhancement
  - - Enhanced slicing speed.
  - - Added a deleting function for the remaining folder/data after forcible shutdown as restarting the machine.
  - 3. Fixed other bugs.
  close
  - [Slicer] A Series Desktop (Windows 10 64bit)(version: 0.9.1186.1) : A+Desktop_v0.9.1186.1.exe Release
    Release Note
    Last modified : 2020-05-11
    (Release Note)
    
    1. Fixed an issue that didn't work when 'A1 + Small' was selected in Settings.
    
    2. Fixed minor GUI component bugs.
    
    3. Fixed other minor bugs.
    close
  - [Slicer] A Series Desktop (Windows 10 64bit)(version: 0.9.1185.0) : A+Desktop_v0.9.1185.0.exe Release
    Release Note
    Last modified : 2020-04-08
    (Release Note)
    
    1. Added a new support type; slanted type.
    
    2. Added a new 'Measure' function menu.
    
    3. Enhanced UI.
    - Added Always-on display feature showing detailed information on printer, material, and uploaded design model.
    close
  - [Slicer] A Series Desktop (Windows 10 64bit)(version: 0.9.1152.8) : A+Desktop_v0.9.1152.8.exe Release
    Release Note
    Last modified : 2020-03-02
    (Release Note)
    New functions added
    Viewing the model transparently or opaquely / Viewing Edges added
    Multiple selection of models with mouse drag added
    (Rotation) 'Place Surface to Platform' added
    (Hollow) 'Generate Hole Plug' added
    (Preview) 'See 2D Preview' added
    (Clip Plane) added
    Enable to load 3mf files
    'A1+ Small' at Printer Models added
    (User Settings) 'Show Platform in Actual Image' added
    (User Settings) 'Allow the models to move out of platform' added
    (Print Settings) at Open Material > Others , Options about Speeds/Repeat of 1st layer/ tilt added
    Materials added
    Other bugs are fixed
    close
  - [Slicer] A Series Desktop (Windows 10 64bit)(version: 0.9.1064.3) : A_Desktop_v0.9.1064.3.exe Release
    Release Note
    Last modified : 2019-09-24
    (Release Note)
    
    Initial Release Slicer for Sindoh SLA Type 3D Printer
    
    Only works for SLA Type 3D Printer (Not Compatible with 3DWOX DP200/DP201/1/1X/2X/5X/7X)
    close
- [Manual] A Series Desktop Slicer Manual(EN) 202005 PDF file
Manual
- A1+(plus) User Manual - ENG 20200824 PDF file
- A1+ Quick Installation Guide(EN ES FR GE) - 201907 PDF file Release
  Release Note
  Last modified : 2019-07-19
  - This is the first version of Quick Installation Guide for A1+, SLA 3D printer series.
  - Supported Languages: English, Spanish, French, German
  close
  - A1+ Quick Installation Guide(EN CN JP KR) - 201907 PDF file Release
    Release Note
    Last modified : 2019-07-10
    
    This is the first version of Quick Installation Guide for A1+, SLA 3D printer series.
    Supported Languages: English, Chinese, Japanese, Korean
    close
Firmware
- A1+ Firmware(version: 20200708_1) : A1plus_Firmware_20200708_1.zip Release
  Release Note
  Last modified : 2020-07-20
  - 1. Updated Resin Specifications.
  - 2. Applied U.S. IoT security regulations.
  - 3. Added Resin Tank detection specification (RT Check)
  - 4. SLICER: Resolved some minor issues and enhanced some functions, etc.
  close
  - A1+ Firmware(version: 20200422_1) : A1plus_Firmware_20200422_1.zip Release
    Release Note
    Last modified : 2020-05-11
    
    1. Adjusted Laser Control setting values to improve surface quality.
    2. Updated minor changes in 'Small Platform & Resin Tank Kit' detection function.
    3. Adjusted the laser power for some resins on the 'First Raft Laser Power' setting.
    close
  - A1+ Firmware(version: 20191114_1) : A1plus_Firmware_191114_1.zip Release
    Release Note
    Last modified : 2019-11-14
    
    This is the first version of A1+ Firmware.
    close

Sindoh 3D Printer is available at - amazon.com

닫기

DOWNLOADS

This website uses Cookies.