Downloads

Software
- 3DWOX Desktop (Windows 7 or later)(version: 1.5.2751.1) : 3DWOX_Desktop_v1_5_2751_1_setup.zip Release
  Release Note
  Last modified : 2020-08-04
  - (Release Note)
  - 1. Added program version for 32bit, 64bit.
  - 2. Added RIZE 2XC, RIZE 7XC model.
  - 3. Added Danish language interface.
  - 4. Changed Setting UI on the advanced mode.
  - 5. Added 'nozzle temperature per layer' setting function.
  - 6. Added image insertion function to G-code.
  - 7. Added initial layer flow compensation function.
  - For users whose PC fails to install the 3DWOX Desktop Slicer, here are the portable (standalone) versions; no installation required.
    
    3DWOX Desktop v1.5.2751.1 x64 (For 64bit).zip
    
    3DWOX Desktop v1.5.2751.1 x86 (For 32bit).zip
    
    In order to run this portable version, your system must have installed this Visual C++ Redistributable. Please download and install it if you haven't installed it yet.
    
    Click here to install x64 version (for 64bit)
    
    Click here to install x86 version (for 32bit)
  close
  - 3DWOX Desktop (Windows 7 or later)(version: 1.4.2481.0) : 3DWOX+Desktop_v1.4.2481.exe Release
    Release Note
    Last modified : 2019-11-18
    
    (Release Note)
    
    - Added new models; 1X, 5X, 7X.
    
    - Added additional wipe tower parameter.
    
    - Added new temperature controls (raft temperature & bottom layer temperature control)
    
    - Supported Wisdom 3D (machine setting)
    close
  - 3DWOX Desktop (Windows 7 or later)(version: 1.4.2316.1) : 3DWOX+Desktop_v1.4.2316.1.exe Release
    Release Note
    Last modified : 2019-04-26
    
    (Release Note)
    
    Added converting scale unit function, "Convert inch to mm" in Scale pop-up menu.
    
    Added Skin Overlap (setting): Made the ratio for skin overlap and infill overlap separately adjustable.
    
    Modified nozzle movement logic: Move z first and then move x and y when moving to a next layer.
    
    Added Internal Moving Area (setting): Enabled to adjust the areas that can move into the model without retraction.
    
    Added Wall Printing Direction: Made user control capable of choosing wall printing orders (printing from inside to outside or vice versa).
    
    Added "Show only current layer" function in Layer Viewer. (Only g-code can be displayed in current layer.)
    close
  - 3DWOX Desktop (Windows 7 or later)(version: 1.4.2213) : 3DWOX+Desktop_v1.4.2213.exe Release
    Release Note
    Last modified : 2018-11-16
    
    (Release Note)
    
    Added PVA+ material : 2X series models.
    
    Added 'Transparent' feature on 'Layer Viewer' mode.
    
    Added 'Export Profile' feature on Easy Mode.
    
    Enabled 2 nozzle printing with PLA and Flexible materials. (2X series)
    
    Fix a bug that malfunction occurs when printing 3 or more files in Swapping Printing mode.
    
    Fixed other bugs.
    close
  - 3DWOX Desktop (Windows 7 or later)(version: 1.4.2149) : 3DWOX+Desktop_v1.4.2149.exe Release
    Release Note
    Last modified : 2018-08-14
    
    1. Fixed a bug that brim doesn't get stuck to the output model.
    
    2. Fixed a bug that Slicer partially not working when the material type is set to ETC. in 2X.
    
    3. Fixed other bugs.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.4.2102) : 3DWOX+Desktop_v1.4.2102.exe Release
    Release Note
    Last modified : 2018-05-29
    1. Added 3DWOX 1, LION 2X Printers.
    2. Added Custom Profile function.
    3. Added Profile Selection function in "SETTINGS".
    4. Changed the shape of the Wipe Tower.
    - Added related profiles: Tower Outer Cartridge , Tower Base Size, Tower Inner Cartridge, Tower Inner Size.
    5. Added Preheat Nozzle Temperature function while printing with Two Nozzle.(Available when Standby Temperature Enabled in Two Nozzle).
    - Added related profiles: Enable Preheat, Preheat Threshold Time.
    6. Open Material Mode support for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303.
    7. Added ETC Material in the Custom Profile for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303 (Open Material Support).
    8. Revised Sindoh Flexible, Sindoh PVA Filament Default Profile.
    9. Added Regular Fan Speed, Maximum Fan Speed Profile : In normal mode, when Fan Speed(Regular Fan Speed) and print time per layer decreases, Fan Speed(Maximum Fan Speed) is separated.
    10. File name is displayed when the model is loaded.
    11. Fixed Other bugs.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.3.1992) : 3DWOX Desktop_v1.3.1992.exe Release
    Release Note
    Last modified : 2018-02-23
    
    1. Added the support horizontal expansion.
    
    2. Fixed the issue wherein the skirt line is sometimes not created around the support.
    
    3. Fixed the issue wherein the support is in the output before the brim/skirt.
    
    4. Added the F1 ECO model (only for Korea).
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.3.1793) : 3DWOX Desktop_v1.3.1793.exe Release
    Release Note
    Last modified : 2017-12-26
    
    1. Modification in the "Settings" User Interface.
    
    2. Additional Language Support. (German)
    
    3. DP200/DP201/2X
    
    Support and Raft: Support Interface function added.
    (Automatically enable the support density between the model and the raft to 100%)
    
    Layer Color function added: Automatic Cartridge Switch available in the selected layers. Link (Layer Color)
    
    4. 2X
    
    Nozzle Switch / Wipe Tower added to support the Dual Nozzle Extrusion.
    
    Cartridge Selection added in the "Settings" for 3DWOX 2X support.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.2.4.0) : 3DWOX Desktop_v1.2.4.exe Release
    Release Note
    Last modified : 2017-07-24
    
    1. Support edit viewer Bugs fixed.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.2.3.0) : 3DWOX Desktop_v1.2.3.exe Release
    Release Note
    Last modified : 2017-07-24
    
    1. Skin outline settings added in Advanced(1) -> Infill section.
    
    2. DP201 model : Gcode from 3rd party slicer cannot be printed.
    
    3. Secure print option added.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.2.2.0) : 3DWOX Desktop_v1.2.2.exe Release
    Release Note
    Last modified : 2017-03-24
    Additional Languages supported.(French, Spanish, Japanese)
    2. Operates as an update instead of deletion when installing the new version.
    3. DP202 additional problems fixed.(Korea Only)
    4. Minor bugs fixed.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.2.1.0) : 3DWOX Desktop_v1.2.1.exe Release
    Release Note
    Last modified : 2017-03-20
    
    1. Additional Languages supported.(French, Spanish, Japanese)
    
    2. Operates as an update instead of deletion when installing the new version.
    
    3. DP202 additional problems fixed.(Korea Only)
    
    4. Minor bugs fixed.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.1.4.1) : 3DWOX Desktop_v1.1.4.1.exe Release
    Release Note
    Last modified : 2017-01-11
    1. Minor bugs fixed.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.1.4.0) : 3DWOX Desktop_v1.1.4.0.exe Release
    Release Note
    Last modified : 2016-11-17
    
    1. New support type (Zigzag type) has been added and set as default for support type.
    
    2. New types of Infill have been added to options. (crystal (1), (2))
    
    3. Now able to save a file in STL and AMF formats.
    
    4. Multi selection feature has been added (scale, rotation, translation).
    
    Ctrl + Left Click(Mouse)
    
    5. Additional guidance message for models desgined in inch scale has been added.
    
    6. UI for the Profile settings screen has been changed.
    
    7. DP202 model has been added to the printer list. (Korea only)
    
    8. Minor bugs fixed.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.1.3.0) : 3DWOX Desktop_v1.1.3.0.exe Release
    Release Note
    1. The max build sizes set for Model DP201 and DP102 have been properly modified.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.1.2.0) : 3DWOX Desktop_v1.1.2.0.exe Release
    Release Note
    1. Calculation speed and inspection criterias of the [Optimize Print Directon] feature have been improved.
    
    2. Now supports files in AMF format.
    
    3. Now supports name and path of the file in multilingual and special characters.
    
    4. Information regarding profile value and printer model has been added to the G-code file.
    
    5. DP102, DP201 model has been added to the list.
    
    6. Minor bugs have been fixed.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.0.8.0) : 3DWOX Desktop_v1.0.8.0.exe Release
    Release Note
    1. Program UI Change: The screen layout and the design of an icon have been changed.
    
    2. The slicing speed has been improved.
    
    3. "Silent Mode" has been added.
    
    4. Raft temperature control function error has been fixed.
    
    5. Addition of the "Lay Flat" function and stabilization
    
    6. Now capable of opening more than one STL file at once
    
    7. Fixed the slicing error which have occured when opening some obj files
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.0.6.0) : 3DWOX Desktop_v1.0.6.0.exe Release
    Release Note
    1. Loading a 3D model to the software now displays status in progress bar.
    
    2. A new method of g-code file drag & drop has been added for file loading.
    
    3. The central axis of the 3D view rotation method has been changed to Z-axis.
    
    4. Setting a printing limit on the upper frontal part of an output [x:210, y:6, z:10 (mm)] and displaying it on the screen has been enabled.
    
    5. The program can now run a large model file.(for 64bit windows os, depending on memory)
    
    6. Printing the most outer line of the raft has been enabled.
    
    7. The setting dialog UI has been rearranged for better visibility.
    
    8. Quad mesh data files can be managed.
    
    9. The spiralization option has been deleted.
    
    10. Various bug fixes and improvements have been made.
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.0.4.0) : 3DWOX Desktop_v1.0.4.0.exe Release
    Release Note
    1. Printing duration and length of filament usage shown during loading of a G-code
    
    2. Filament usage amount is now shown in units of (g)
    
    3. Default value for SKIRT has changed from 0 -> 1
    
    4. Default value for TOP/BOTTOM THICKNESS has changed from 0.6 -> 0.8
    
    5. Start code has changed from G92-20 to G92 -G15
    
    6. +90/-90 buttons have been added to the rotation dialog
    7. XYZ axis indicators added
    
    8. Extra bug fixes
    close
  - 3DWOXDesktop (Windows 7 or later)(version: 1.0.2.0) : 3DWOX Desktop_v1.0.2.0.exe
  - 3DWOXDesktop (Windows 7 or later)(version: 1.0.1.0) : 3DWOX Desktop_v1.0.1.0.exe
- [Add-in] Solidworks Add-in(2016 later) for 3DWOX(version: 1.3.757) : Install_Solidworks_Add-in_for_3DWOX_v1.3.757.exe Release
  Release Note
  Last modified : 2019-11-01
  - Support SolidWorks version 2016 ~ 2019.
  - Support additional printer models. (including 2-nozzle printers)
    - Supported Models: 3DWOX DP200, DP201, 1, 1X, 2X, 7X
  - Integrate UI with 3DWOX Desktop Slicer.
  close
  - [Add-in] Solidworks Add-in(2016 later) for 3DWOX(version: 1.2.508) : SwAddin3DWOX_SolidWorks2018_1.2.508.exe Release
    Release Note
    Last modified : 2018-08-21
    This update is for Window OS above Window 7 SP1 and Solidworks 2016, 2017 & 2018
    Added 3DWOX 1, 2X and etc. models for the 3D printer option in Solidworks add-in.
    This version works only at the single nozzle printing mode in 2X.
    Added an open-material option for material setting.
    close
  - [Add-in] Solidworks Add-in(2016 later) for 3DWOX(version: 1.2.452) : SwAddin3DWOX_v1.2.452.zip Release
    Release Note
    Last modified : 2018-06-05
    This update is for SolidWorks 2016, 2017, 2018
    Bug fix for g-code transfer fail during security print mode
    close
  - [Add-in] Solidworks Add-in(2016 later) for 3DWOX(version: 1.1.0.0) : SwAddin3DWOX_v1.1.0.0.exe Release
    Release Note
    Last modified : 2017-08-31
    
    Added new printer models. (DP102 / DP201 / DP202)
    
    Added analysis (Optimize Print Direction) function.
    
    Added analysis (thickness / overhang) function.
    
    If it is Assy, it can be output as one part or divided into each part.
    
    Changed to scale only with fixed ratio.
    close
  - [Add-in] Solidworks Add-in(2016 later) for 3DWOX(version: 1.0.0.1) : SwAddin3DWOX_1.0.0.1.exe Release
    Release Note
    Last modified : 2016-12-06
    
    1. "Web Monitoring" has been improved.
    
    Continuously monitors when "AutoShow" is selected
    
    A few bugs have been fixed
    
    2. "Help Button" has been enabled (Automatically connects to the Manual).
    
    3. Profile
    
    "Reset Button" has been added
    
    Has been renewed to the latest profile
    
    4. The option to set a printing limit on the upper frontal part of an output and display it on the screen has been enabled.
    
    5. The issue has been fixed (Problem occurred due to the different usage of . and , when displaying figures).
    
    6. Displays the borders of the selected model
    close
  - [Add-in] Solidworks Add-in(2016 later) for 3DWOX(version: 0.9.0.1) : SwAddin3DWOX.exe
- 3DWOX Desktop (Mac OS X v10 .1 and above)(version: 1.3.980.0) : 3DWOX+Desktop_v_1.3.980.pkg Release
  Release Note
  Last modified : 2020-08-04
  - (Release Note)
  - 1. Added RIZE 2XC, RIZE 7XC model.
  - 2. Added Danish language interface.
  - 3. Changed Setting UI on the advanced mode.
  - 4. Added 'nozzle temperature per layer' setting function.
  - 5. Added image insertion function to G-code.
  - 6. Added initial layer flow compensation function.
  close
  - 3DWOX Desktop (Mac OS X v10 .1 and above)(version: 1.3.913.0) : 3DWOX_Desktop_v_1.3.913.pkg Release
    Release Note
    Last modified : 2019-11-18
    
    (Release Note)
    
    - Added new models; 1X, 5X, 7X.
    
    - Added additional wipe tower parameter.
    
    - Added new temperature controls (raft temperature & bottom layer temperature control)
    close
  - 3DWOX Desktop (Mac OS X v10 .1 and above)(version: 1.3.883.1) : 3DWOX+Desktop_v_1_3_883_1.pkg Release
    Release Note
    Last modified : 2019-04-26
    
    (Release Note)
    
    Added converting scale unit function, "Convert inch to mm" in Scale pop-up menu.
    
    Added Skin Overlap (setting): Made the ratio for skin overlap and infill overlap separately adjustable.
    
    Modified nozzle movement logic: Move z first and then move x and y when moving to a next layer.
    
    Added Internal Moving Area (setting): Enabled to adjust the areas that can move into the model without retraction.
    
    Added Wall Printing Direction: Made user control capable of choosing wall printing orders (printing from inside to outside or vice versa).
    
    Added "Show only current layer" function in Layer Viewer. (Only g-code can be displayed in current layer.)
    close
  - 3DWOX Desktop (Mac OS X v10 .1 and above)(version: 1.3.860) : 3DWOX+Desktop_v_1_3_860.pkg Release
    Release Note
    Last modified : 2019-01-02
    
    (Release Note)
    
    Fixed a bug that slows down the 3D rotation view in the 'Layer Viewer' mode.
    
    Fixed other bugs.
    close
  - 3DWOXDesktop (Mac OS v10.10~10.12)(version: 1.3.830) : 3DWOX+Desktop_v_1_3_830.pkg Release
    Release Note
    Last modified : 2018-11-16
    (Release Note)
    
    Added PVA+ material : 2X series models.
    
    Added 'Transparent' feature on 'Layer Viewer' mode.
    
    Added 'Export Profile' feature on Easy Mode.
    
    Enabled 2 nozzle printing with PLA and Flexible materials. (2X series)
    
    Fix a bug that malfunction occurs when printing 3 or more files in Swapping Printing mode.
    
    Fixed other bugs.
    close
  - 3DWOXDesktop (Mac OS v10.10~10.12)(version: 1.3.804) : 3DWOX_Desktop_v_1.3.804.pkg Release
    Release Note
    Last modified : 2018-08-14
    
    1. Fixed a bug that brim doesn't get stuck to the output model.
    
    2. Fixed a bug that Slicer partially not working when the material type is set to ETC. in 2X.
    
    3. Fixed other bugs.
    close
  - 3DWOXDesktop (Mac OS v10.10~10.12)(version: 1.3.781) : 3DWOXDesktop_v1.3.781.pkg Release
    Release Note
    Last modified : 2018-05-29
    
    1. Added 3DWOX 1, LION 2X Printers.
    2. Added Custom Profile function.
    3. Added Profile Selection function in "SETTINGS".
    4. Changed the shape of the Wipe Tower.
    - Added related profiles: Tower Outer Cartridge , Tower Base Size, Tower Inner Cartridge, Tower Inner Size.
    5. Added Preheat Nozzle Temperature function while printing with Two Nozzle.(Available when Standby Temperature Enabled in Two Nozzle).
    - Added related profiles: Enable Preheat, Preheat Threshold Time.
    6. Open Material Mode support for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303.
    7. Added ETC Material in the Custom Profile for 3DWOX 1, 3DWOX 2X, LION, LION 2X, 2X DP303 (Open Material Support).
    8. Revised Sindoh Flexible, Sindoh PVA Filament Default Profile.
    9. Added Regular Fan Speed, Maximum Fan Speed Profile : In normal mode, when Fan Speed(Regular Fan Speed) and print time per layer decreases, Fan Speed(Maximum Fan Speed) is separated.
    10. File name is displayed when the model is loaded.
    11. Fixed Other bugs.
    close
  - 3DWOXDesktop (Mac OS)(version: 1.2.689) : 3DWOX_Desktop_v_1.2.689.pkg Release
    Release Note
    Last modified : 2018-02-23
    
    1. Added the support horizontal expansion.
    
    2. Fixed the issue wherein the skirt line is sometimes not created around the support.
    
    3. Fixed the issue wherein the support is in the output before the brim/skirt.
    
    4. Added the F1 ECO model (only for Korea).
    close
  - 3DWOXDesktop (Mac OS)(version: 1.2.620) : 3DWOX_Desktop_v_1.2.620.pkg Release
    Release Note
    Last modified : 2017-12-26
    
    1. Modification in the "Settings" User Interface.
    
    2. Additional Language Support. (German)
    
    3. DP200/DP201/2X
    
    Support and Raft: Support Interface function added.
    (Automatically enable the support density between the model and the raft to 100%)
    
    Layer Color function added: Automatic Cartridge Switch available in the selected layers. Link (Layer Color)
    
    4. 2X
    
    Nozzle Switch / Wipe Tower added to support the Dual Nozzle Extrusion.
    
    Cartridge Selection added in the "Settings" for 3DWOX 2X support.
    close
  - 3DWOXDesktop (Mac OS)(version: 1.1.7) : 3DWOX_Desktop_v_1.1.7.pkg Release
    Release Note
    Last modified : 2017-07-24
    
    1. New support type (Zigzag type) has been added and set as default for support type.
    
    2. New types of Infill have been added to options. (crystal (1), (2))
    
    3. Now able to save a file in STL and AMF formats.
    
    4. Multi selection feature has been added (scale, rotation, translation).
    
    Command + Left Click(Mouse)
    
    5. Additional guidance message for models desgined in inch scale has been added.
    
    6. UI for the Profile settings screen has been changed.
    
    7. DP202 model has been added to the printer list. (Korea only)
    
    8. Skin outline settings added in Advanced(1) -> Infill section
    
    9. DP201 model : Gcode from 3rd party slicer cannot be printed
    
    10. Secure print option added.
    
    11. Minor bugs fixed.
    close
  - 3DWOXDesktop (Mac OS)(version: 1.1.5) : 3DWOX_Desktop_v_1.1.5.pkg Release
    Release Note
    Last modified : 2017-04-17
    
    1. Additional Languages supported.(French, Spanish, Japanese)
    
    2. Minor bugs fixed.
    close
  - 3DWOXDesktop (Mac OS)(version: 1.1.3) : 3DWOX_Desktop_v_1.1.3.pkg Release
    Release Note
    Last modified : 2016-11-04
    
    1. Calculation speed and inspection criterias of the [Optimize Print Directon] feature have been improved.
    
    2. Now supports files in AMF format.
    
    3. Now supports name and path of the file in multilingual and special characters.
    
    4. Information regarding profile value and printer model has been added to the G-code file.
    
    5. DP102, DP201, DP202 model has been added to the list.
    
    6. Minor bugs have been fixed.
    close
  - 3DWOXDesktop (Mac OS)(version: 1.0.8) : 3DWOX_Desktop_v_1.0.8.pkg Release
    Release Note
    1. Program UI Change: The screen layout and the design of an icon have been changed.
    
    2. Various bug fixes and improvements have been made.
    close
  - 3DWOXDesktop (Mac OS)(version: 1.0.5) : 3DWOX_Desktop_v_1.0.5.pkg
- [Manual] 3DWOX_Slicer Manual_ENG_201911 PDF file
  - [Manual] 3DWOX_Slicer Manual_ENG_201807 PDF file
  - [Manual] 3DWOX_Slicer Manual_ENG_201703 PDF file
- [Manual] Solidworks Add-in for 3DWOX Manual 2.0 PDF file
  - [Manual] Solidworks Add-in for 3DWOX Manual 1.0 PDF file
Manual
- 3DWOX DP201 User Manual - ENG PDF file
  - 3DWOX DP201 User Manual - KOR PDF file
- Quick Installation Guide DP201 (EN_CN_KR) PDF file Release
  Release Note
  Last modified : 2017-11-06
  - Supported Languages: English, Chinese, Korean
  close
- Nozzle Unit replacement Guide DP201 (EN_CN_KR) PDF file Release
  Release Note
  Last modified : 2019-11-21
  - Supported Languages: English, Chinese, Korean
  close
- Cartridge Refill Manual A type PDF file
- Cartridge Refill Manual B type PDF file
- Cartridge Refill Manual C type PDF file
Firmware
- 3DWOX DP200/DP201 Firmware(version: 200730_2) : RODIN_200730_2.zip Release
  Release Note
  Last modified : 2020-10-13
  - 1. Enabled progress display GUI for Cura gcode printing.
  - 2. Added automatic certificate renewal for Apps for Kids.
  - 3. Fixed other minor bugs.
  close
  - 3DWOX DP200/DP201 Firmware(version: 191210_1) : RODIN_191210_1.zip Release
    Release Note
    Last modified : 2020-02-18
    
    Fixed a problem taking a long time to display an image when repeatedly displaying the thumbnail image by selecting a file over and over.
    close
  - 3DWOX DP200/DP201 Firmware(version: 190430_1) : RODIN_190430_1.zip Release
    Release Note
    Last modified : 2019-07-12
    
    Enabled Cloud Printing.
    - AutoCad TinkerCad, SolidWorks Apps for Kids
    close
  - 3DWOX DP200/DP201 Firmware(version: 180417_2) : RODIN_180417_2.zip Release
    Release Note
    Last modified : 2018-06-08
    
    1. DP200/201 : Cartridge compatibility expansion
    close
  - 3DWOX DP200/DP201 Firmware(version: 180115_3) : RODIN_180115_3.zip Release
    Release Note
    Last modified : 2018-06-08
    
    1. DP200/201 : German, Turkish language support added
    
    2. DP200/201 : improvement for reducing 407 error from g-code created by Cura
    close
  - 3DWOX DP200/DP201 Firmware(version: 20170912_1) : rodin.20170912_1.zip Release
    Release Note
    Last modified : 2017-09-28
    
    1. DP200/201 : Fix the issue which Wifi auto connection fails during the booting process in a certain condition.
    close
  - 3DWOX DP200/DP201 Firmware(version: 20170726_1) : rodin.20170726_1.zip Release
    Release Note
    Last modified : 2017-08-30
    
    1. DP201 : Fix a bug that makes the nozzel temperature intermittently unable to reach the certain point.
    
    2. DP200, DP201 : Fix a bug which causes z-offset malfunction intermittently.
    close
  - 3DWOX DP200/DP201 Firmware(version: 20170623_2) : rodin.20170623_2.zip Release
    Release Note
    Last modified : 2017-07-25
    
    1. Solidworks Apps For Kids is Now Available! (only for DP201)
    
    * Please refer to the following URL:http://3dprinter.sindoh.com/FAQs?id=1_51#panel-1
    
    2. Security Print Added
    
    - When the Security Print is Enabled
    
    a. Password is required for printing with the 3DWOX Desktop (3DWOX Desktop(Windows) Ver 1.2.3 and above, 3DWOX Desktop(Mac OS) Ver 1.1.6 and above is required)
    
    b. Password is required for printing directly through the USB Thumbdrive
    
    c. Password is required for Web Monitoring
    
    3. EC356 (sensing bug fix for intermittent Bed Heater disconnection) error fixed
    
    4. Calculation bug fix for intermittent Extruder movement amount error
    
    5. DP201, DP202 model : Built-in test print file changed
    close
  - 3DWOX DP200/DP201 Firmware(version: 20170308_1) : rodin.20170308_1.zip Release
    Release Note
    Last modified : 2017-03-13
    
    1. Correction in typing errors and Complementation of Japanese/Spanish/French Quick Guide
    close
  - 3DWOX DP200 Firmware(version: 20170123_2) : rodin.v_20170123_2.zip Release
    Release Note
    Last modified : 2017-02-10
    
    1. Reduced the Booting Time by deleting unnecessary initialization of the Nozzle Positioning when Booting.
    
    2. Displays 'Loading' icon in the Web Monitor when printing through """Network Printer' on the 3DWOX Desktop Software.
    
    3. Displays """Unsupported Filament!""" Pop-up when printing with an unsupported type of filament.
    
    4. Display file names with special characters (" [Double Quotation marks] and ' [Quotation marks]) in the Web Monitor.
    
    5. Countermeasures applied to sending the identical images intermittently when printing *.gcode files with the E-mail settings.
    
    6. Displays "Time Remaining" in the Web Monitor.
    
    7. Reduced the Operating Time by removing unnecessary Bed movements during the processes such as Cartridge load / Manual Cleaning.
    
    8. Additional Supported Languages (Spanish / French)
    
    9. Users are now able to switch the cartridge and continue printing when the Filament runs out during printing(Notification 432).
    close
  - 3DWOX DP200 Firmware(version: 20160505_4) : rodin.v_20160505_4.zip Release
    Release Note
    Last modified : 2016-08-19
    
    1. The issue that the e-mail notification function does not work depending on the server settings has been addressed.
    
    2. The error codes that have occured in some devices when checking the leveling sensor have been fixed.
    close
  - 3DWOX DP200 Firmware(version: 20160505_1) : rodin.v_20160505_1.zip Release
    Release Note
    1. Printer stores a printing job in its embedded memory and prints it after a current printing job is finished.
    
    2. Cancellation during Bed lowering / Extruder jog Mode has been enabled.
    
    3. Noise made during short distance movement has been improved.
    
    4. Quality of embedded Test Gcode File has been improved.
    
    5. Operation regarding Cartridge end/Heater malfuction detectoin have been improved.
    
    6.Bugs have been fixed.
    close
- 3DWOX Firmware Update Guide PDF file

Sindoh 3D Printer is available at - amazon.com

닫기

DOWNLOADS

This website uses Cookies.