Go to contents
Go to main menu
Go to footer
DIY, hobbies and home
特价商品 (木材, 铜, 等)
A simple alternative for annoyingly fragile paper holders. Part features letters to identify to which stick size it belongs. This particular version is designed for Vic Firth 5A drumsticks (14.4mm diameter), but can also be used for many bigger diameters. ZIP archive contains Solidworks model that is fully customizable, so you can fit sticks of any desired diameter. o Technical Information - Date published : 01/11/2018 - Support Free : YES ======================================= Recorder Mouthpiece by 3Dramen @3Dramen (https://www.myminifactory.com/users/3Dramen ) We appreciate 3Dramen to allow us to share your talented design here.
Alto Saxophone Ring Ligature
I designed this ligature based on the bois ring ligature for my Martin Elkhart Alto Saxophone. It has a groove inside to put 1/16th inch o-ring stock if you want to (glued in with superglue). It's a 25mm inner diameter with the O-ring and 28mm without the ring. You may want to measure your mouthpiece beforehand to make sure it will fit and scale the model slightly if needed. If scaled slightly, it will also work for clarinets as well as tenor, soprano, baritone sax etc. o Technical Information - Date published : 01/11/2018 - Support Free : YES ======================================= Alto Saxophone Ring Ligature by Daniel Anderson @cudderbup (https://www.myminifactory.com/users/cudderbup ) We appreciate Daniel to allow us to share your talented design here.
This is known as a shepards whistle. Mainly used in New Zealand by sheep herders. People also use this to train dogs and other animals like birds of prey. There's a great video on youtube about how to use this. (https://www.youtube.com/watch?v=Mv66viUCn1Y ) You can experiment with sizes for different tones. Like most things, you'll have to get used to it in your mouth. o Technical Information - Date published : 27/10/2018 - Support Free : YES ======================================= Eachine E010 lite frame by Hunter Delong @HADD1 (https://www.myminifactory.com/users/HADD1 ) We appreciate Hunter Delong to allow us to share your talented design here.
Guitar Strap Button
Another tiny easy print, this time is a guitar strap button. o Technical Information - Date published : 29/10/2018 ======================================= Guitar Strap Button by Thái Việt Dũng @thiitdng908650 (https://www.myminifactory.com/users/thiitdng908650 ) We appreciate Thái Việt Dũng to allow us to share your talented design here.
Knob Spirit Folio Soundcraft
Knob for Soundcraft Spirit Folio Sound Mixing Table #FixMyInstrument @MyMiniFactory @3DWOX_Sindoh o Printing Details - No supports, No raft, No Brim required - 2 shells - Nozzle 0.35 mm - Layer size : 0.2mm high - Top and Bottom layers : 3 layers (=0.6mm) - Infill : 20 percentile - PLA : 212 °C o Technical Information - Date published : 07/11/2018 - Time to do : 20 - 30 minutes - Material Quantity : 5 grams - Dimensions : 20mm x 20mm x 36mm - Support Free : YES ======================================= Knob Spirit Folio Soundcraft by MoreAnge @My49RobotAnge3000 (https://www.myminifactory.com/users/My49RobotAnge3000 ) We appreciate MoreAnge to allow us to share your talented design here.